NEWS CENTER
Get a fuller understanding of our information
28
2023
-
03
Precautions for electric wrenches
Author:
1) Before the tool is powered on, it is necessary to check that the switch is in the OFF state before inserting it.
2) Confirm whether the on-site power supply matches the voltage required by the electric wrench, and whether there is a leakage protector connected.
3) Select a matching sleeve based on the size of the nut and install it properly.
4) Neither too high nor too low voltage should be used.
5) Do not use the simplified form as a hammer tool.
6) Do not apply force after adding a sleeve or crowbar to the hand lever.
7) The metal shell of an electric wrench needs to be reliably grounded.
8) Check the fastening of the mounting screws on the body of the electric wrench. If the screws are found to be loose, they need to be retightened immediately.
9) Check whether the handles on both sides of the hand-held electric wrench are intact and firmly installed.
10) Measures to prevent falling from heights shall be taken when working on ladders or working at heights.
11) If the workplace is located away from the power supply and it is necessary to extend the cable, it is necessary to use an extension cable with sufficient capacity and qualified installation.
Related news
Adjustment and use of charging drill
2023-03-28
Use and structure of charging drill
2023-03-28
Working principle of electric wrench
2023-03-28
Precautions for electric wrenches
2023-03-28
Classification of electric wrenches
2023-03-28
We sincerely looking forward to cooperating with you !
Add
Zhaomin Development Zone, Lvsigang Town, Qidong City, Jiangsu Province
Tel/ WhatsApp
Nantong Shangzhiming Import and Export Co., Ltd. Powered by www.300.cn SEO
